WHAT IS ScanINSPECT FPT?
ScanINSPECT FPT is a flying probe electrical tester suitable for fixture-less bare PCBs. It can also be used in combination with a grid tester for fault verification or to test nets exceeding test points of a grid tester.
Software runs on Windows XP. The tester is fast, easy to use, very reliable and easy to maintain.


APPLICATIONS
ScanINSPECT FPT is capable of performing electrical tests on PCBs in many situations such as:
  • Prototypes
  • Samples
  • Small volume production
  • Determination of "golden board"
  • Combination test with a grid tester
  • Fault verification
  • Determination of "golden board"
A PCB is tested against a netlist without the need for fixtures. Hence, test can commence immediately after PCB production.

SIMPLE OPERATION
The ScanINSPECT FPT system can be quickly learned and is simple to operate. Loading of boards is simple. Operators verify faults on or off line. Log files are generated for faults detected during test.

TECHNICAL SPECIFICATIONS
System Specifications* (see below)

    COMPUTER*
  • Pentium (3GHz or higher) Personal Computer
  • 80 GB HD, 2 GB RAM
  • CD-ROM (CD-RW for archive purposes)
  • Flat Panel Monitor
  • Fault Ticket Printer
  • Win XP Service Pack 2

    • *Recommended customer supplied minimum PC requirements.

    ADDITIONAL SYSTEM COMPONENTS
  • X/Y Accuracy Calibration Board
  • Capacitance Calibration Board
  • Spare Probe Tips
  • Frame Kits
  • Tooling Kit


    • The following are trademarks of the indicated companies: Gerber, The Gerber Scientific Instrument Company; HP-GL, HP, Hewlett-Packard; Windows XP, Microsoft®. ScanINSPECT FPT™ is a trademark of ScanCAD International, Inc.
*All specifications and designs subject to change without notice*

Printable PDF file of this data sheet

Email: info@scancad.com
System Specifications*
SpecificationScanINSPECT FPT IScanINSPECT FPT IIScanINSPECT FPT IIIScanINSPECT FPT IV
Max. Test Area620 x 508 mm544 x 404 mm 610 x 510 mm
Min. Test Area20 x 20 mm50.8 x 50.8 mm
Max. Thickness6.5 mm
Min. Thickness0.4 mm0.3 mm0.15 mm
Thin Board Testingn/aEnabled Enabled (FPC Board OK)
Tension Framen/aEnabled (Mechanical) Enabled (pneumatic)
Automatic Loading & Unloadingn/aEnabled
Resolution x/y0.02 mm0.01 mm0.005 mm
Accuracy±0.05 mm±0.02 mm±0.015 mm
Min. Pad Size0.127 mm (5 mil)0.1 mm (4 mil) 0.075 mm (3 mil)
Min. Pitch0.203 mm (8 mil)0.18 mm (7 mil) 0.127 mm (5 mil)
Test Speed1000 Points/Min.1200 Points/Min. 3000 Points/Min.
Number of Test Probes2 Front 2 Rear
Probe Tip Force50g-100g25g-50g20g-30g 10g-20g
Operating SystemWindows XP
Input Data FormatGerber-274-D / Gerber-274-X / IPC-D-356A / Probot-HLS
Universal Tester Verificationn/aEnabled
Repair Stationn/aEnabled
CCD Camerasnone1 Front 1 Rear
Test Voltage30V-250V20V- 500V, 1000V(Optional)
Test Current30mA-250mA2mA-500mA (Adjustable)
Continuity Test3-80 ohm1-150 ohm 1-10K ohm
Isolation Test22M-250M ohm10M-500M ohm
Hiram Testing Scope0.1pF-10mF
Printer / MonitorTicket Printer / 15" LCD
Physical Dimensions1370(w) x 1650(h) x 620(d) mm1300(w) x 1750(h) x 650(d) mm1600(w) x 1950(h) x 800(d) mm
Temperature15C - 30C
Humidity30%-70% (20C)
Weight350 kg400 kg600 kg
Electrical Power220V±5%/50-60Hz,600W220V±5%/50-60Hz, 1500W
Factory AirNone required